Epsum factorial non deposit quid pro quo hic escorol. Olypian quarrels et gorilla congolium.
- You International Trade Company
- Phone: 0579-8132 9868
- E-mail: firstname.lastname@example.org
- Fax:0579- 81326698
- skype: Fusce ac
MOP, Spin MOP and Flat MOP
Mop, also known as mop cloth, refers to the long handle cleaning tool that scours the floor, and also refers to the long handle cleaning tool. The mop should be derived from the rag. The most traditional mop is to tie a bunch of cloth to one end of a long wooden pole. Simple, cheap. The work head is changed from a rag block to a bunch of cloth, which has a strong decontamination capability.
Dip the dirt out of the ground with a proper amount of water.
The mop should be derived from the rag. When the ground to be cleaned is earth, people are afraid that they want to sweep it away, not necessarily to wipe it off. With the improvement of productivity and the change of living environment, the need for scrubbing is needed when the clean ground is changed from soil to clean boards and slates. The earliest scrubbing ground should be a rag. Although the washing has made the floor clean, the operator's first question has come too tired. The problem is the source of inspiration, someone installed a long handle on the rag, oh, the difference - the benefit is seen, the name of the image - "mop". The mop came to the world. The "upright walking" has been realized.
After a long time, the new problem came again. The mop's working part, the mop head itself, also needs constant washing. The problem of cleaning the head of the mop to the operator's hand rises to the problem that needs to be solved. Therefore, the smart people, for the mop with the "wring water" device and "rotary drying" device, which has the "wring the mop" and "dry mop", to solve the problem of dehydrating the head of the mop.
With the growing growth of the tree of science, the materials used in the head of the mop are becoming more and more extensive. From the early cotton strips, they have developed non-woven fabrics, superfine fibers and even a single piece of collodion (mop mop). The collodion mop is more suitable for cleaning the floor water of kitchen and toilet because of its strong water absorption and matching of convenient water squeezing device.
The crank mop raises the brain on the mop rod, and the crank part is added to the traditional straight rod, which makes the movement of the head of the mop on the ground more convenient and labor-saving. It solves the difficult problem of the straight rod mop bending down and the garbage debris being pushed and pushed to the bottom. At the same time, the rocking crank can also be high for the mop. The speed revolving thorough cleaning provides the power.
Today, the functions of mops are constantly expanding and assistive devices are emerging one after another.
The most traditional mop is to tie a bunch of cloth to one end of a long wooden pole.
The work head is changed from a rag block to a bunch of cloth, which has a strong decontamination capability.
The main changes are:
(1) the shape of the head material in addition to the cloth bar also appears yarn rope shape, now more use of ultra-fine fiber yarn, with strong decontamination, good water absorption, no mildew and so on.
(2) the head installation has a replaceable type except for the fixed type, so as to facilitate the replacement of the towing yarn.
(3) apart from the fixed type, the work bar has a telescopic joint with adjustable length to suit different heights of people.
(4) the shape of the working head develops from the beginning of the circle to the strip and the flat type, and later develops into the flat mop.
(5) the material of the working head is made of super fine fibers and collodion bars besides cotton, and later developed into a cotton mop mop.
In the design of the changeable trailer, first use wet towing head to mop the floor and then dry the trailer to mop the floor. Moreover, the towing head is broken and it can be replaced and the cost is saved. The traditional mop is still the most used, so many manufacturers still rely on traditional mop production.
(1) stainless steel, stainless steel for long term use (2) using ultra-fine fiber cloth to wipe automobile glass and glasses.
Stainless steel mop
(3) ultra strong decontamination ability, electrostatic adsorption capacity, water absorption capacity (4) the top of the clean head is installed on the protection department, to avoid the head end of the working rod to the cleaning surface injury. (5) the fixing device is installed at the lower end of the rotary drum to avoid the movement of the rotary cylinder when working. (6) a central positioning device is installed at the upper end of the rotary drum to avoid swaying during work. (7) a check lock is installed on the work rod to avoid reversal of the working of the rotary cylinder when the water is squeezed. (8) the telescopic bar is designed to adjust its length according to its height (9) it is easy to rotate and squeeze water without auxiliary tools (10).
Its biggest feature is to ensure that the water swab self wring function is inherited while the material of the working head changes with polyvinyl alcohol collodion.
Collodion has strong water absorption and can fully guarantee the cleaning work of the working head.
The main changes are around the function of water squeezing.
(1) roll rod squeezing water
(2) plate extrusion
A auxiliary appliance used in a mop.
There are two kinds of mop accessories: (1) the insufficiency of mop function; (2) management utensils.
(1) functional equipment: fried bucket (car). For example, all kinds of auxiliary mop mop heads are dehydrated by squeezing water and drying barrels.
(2) management utensils: all kinds of mops and other cleaning tools.
Dump a mop
Almighty King mop
Using the principle of centrifugal force, a bit of manpower is used to dry the mop like washing machine.
With a crank with a rocker instead of a traditional straight rod, the head of the mop is not just straight as it was, but it can be easily turned and out of the S or spiral track. On the one hand, the head of the mop is no longer required to start and stop frequently.