Home > Knowledge > Content
Operation instruction of commercial wet and dry vacuum cleaner
- May 30, 2018 -

Operation instruction of commercial wet and dry vacuum cleaner

 

Attention:

Before cleaning or maintaining the appliance, the power plug must be removed from the

socket-outlet

l  Attention: Before assembly and starting operation, read the operating

instructions carefully

l  Check that the mains voltage corresponds to the details on the type plate

l  Only connect to a proper 220-240 volt, 50/60Hz socket

l  Pull the mains plug out of the socket when: the unit is not in use, before

opening the unit, before cleaning and maintenance

l  Never clean with solvents

l  Do not use the cable to pull the plug out of the socket

l  When unit is ready for use, do not leave unattended

l  Safeguard from children

l  Care must be taken that the mains connection lead is not damaged by

being driven over, crushed, stretched, etc

l  The unit must not be operated if the mains connection lead is not in perfect

condition

l  If the supply cord is damaged, it must be replaced by the manufacturer or

its service agent to a similarly qualified person in order to avoid a hazard.

l  On no account vacuum: burning matches, glowing ashes and cigarette

ends, inflammable, corrosive, fire hazard or explosive substances, vapours

and liquids

l  This unit is not suitable for vacuuming dust which is damaging to health

l  Store the unit in a dry place

l  Do not operate a defection unit

l  Servicing only by an authorized after-sales service point

l  Use only for operations for which the unit is intended

l  Take great care when cleaning stairs

l  Use only manufacturer’s attachments and spare parts

l  This appliance can be used by children aged from 8 years and above and

persons with reduced physical, sensory or mental capabilities or lack of

experience and knowledge if they have been given supervision or instruction

concerning use of the appliance in a safe way and understand the hazards

involved

l  Children shall not play with the appliance.

 

Commercial wet and dry vacuum cleaner CT/JN308 Series

blob.png

Items supplied:

1、  Handle

2、  ON/OFF switch

3、  Top section

4、  Filter basket

5、  Safety float valve

6、  Clasp

7、  Container

8、  Vacuum hose connection

9、  Idler wheel

10、 Flexible vacuum hose

11、 Vacuum tube

12、 air inlet

3/6

13、 Large vacuum nozzle

14、 Dust bag

15、 turn on the water pipe

16、 Crevice nozzle

 

Overview of nozzles

blob.png

 

Assembly

blob.png

 

Please note:

Figure 6a:Use the supplied foamed plastic filter for wet vacuum-cleaning

Figure 6b:Use the supplied dust bag for dry vacuum-cleaning

 

Wet vacuum – cleaning

blob.png

Unplug before change filter (Figure 1)

Pull the supplied foamed plastic filter over the filter basket (Figure 2) for wet

vacuum-cleaning.

Insert the plug and turn on the switch, then appliance starts to work (Figure 4 &

5a or 5b)

The dust bag included upon delivery is not suitable for wet vacuum-cleaning!

 

Dry vacuum-cleaning

blob.png

Unplug before change filter (Figure 1), then take out the bag and empty the

dust or replace the bag. Slip the dust bag onto the socket(figure 2) for dry

vacuum-cleaning.

Insert the plug and turn on the switch, then appliance starts to work (Figure 5 &

6a or 6b)

The dust bag is suitable only for dry vacuum-cleaning!

Maintenance – cleaning

blob.png

Unplug before maintenance (Figure 1)

Take off the foamed plastic filter (Figure 3), and wash by water (Figure 5)

IMPORTANT:  Do not use detergents to clean the filter. The filter must be

thoroughly dry before the machine is used.


Related Products