Home > Knowledge > Content
Industry Wet Dry Vacuum cleaner Operation Manual
- May 29, 2018 -

Industry Wet Dry Vacuum cleaner Operation Manual

 

Attention:

Before cleaning or maintaining the appliance, the power plug must be removed from the

socket-outlet

? Attention: Before assembly and starting operation, read the operating

instructions carefully

? Check that the mains voltage corresponds to the details on the type plate

? Pull the mains plug out of the socket when: the unit is not in use, before

opening the unit, before cleaning and maintenance

? Never clean with solvents

? Do not use the cable to pull the plug out of the socket

? When unit is ready for use, do not leave unattended

? Safeguard from children

? Care must be taken that the mains connection lead is not damaged by

being driven over, crushed, stretched, etc

? The unit must not be operated if the mains connection lead is not in perfect

condition

? If the supply cord is damaged, it must be replaced by the manufacturer or

its service agent to a similarly qualified person in order to avoid a hazard.

? On no account vacuum: burning matches, glowing ashes and cigarette

ends, inflammable, corrosive, fire hazard or explosive substances, vapours

and liquids

? This unit is not suitable for vacuuming dust which is damaging to health

? Store the unit in a dry place

? Do not operate a defection unit

? Servicing only by an authorized after-sales service point

? Use only for operations for which the unit is intended

? Take great care when cleaning stairs

? Use only manufacturer’s attachments and spare parts

? This appliance can be used by children aged from 8 years and above and

persons with reduced physical, sensory or mental capabilities or lack of

experience and knowledge if they have been given supervision or

instruction concerning use of the appliance in a safe way and understand

the hazards involved

? Children shall not play with the appliance.

? Cleaning and user maintenance shall not be made by children without

supervision.

? IPX4 is only granted by connect an IPX4 plug to socket-out of the appliance

or the cover of the socket-out is closed.


Model CT/JN201 Series

21.png

22.png


Items supplied:

1、  Handle

2、  ON/OFF switch

3、  Top section

4、  Filter basket

5、  Safety float valve

6、  Clasp

7、  Container

8、  Vacuum hose connection

9、  Idler wheel

10、 Flexible vacuum hose

11、 Vacuum tube

12、 air inlet

13、 Large vacuum nozzle

14、 Dust bag

15、 turn on the water pipe

16、 Crevice nozzle

17、 Socket outlet

 

 

Overview of nozzles

23.png

Assembly

24.png

 

Please note:

Figure 6a:Use the supplied foamed plastic filter for wet vacuum-cleaning

Figure 6b:Use the supplied dust bag for dry vacuum-cleaning

 

Wet vacuum – cleaning

25.png

Unplug before change filter (Figure 1)

Pull the supplied foamed plastic filter over the filter basket (Figure 2) for wet

vacuum-cleaning.

Insert the plug and turn on the switch, then appliance starts to work (Figure 4 &

5a or 5b)

 

Dry vacuum-cleaning

26.png

Unplug before change filter (Figure 1), then take out the bag and empty the

dust or replace the bag. Slip the dust bag onto the socket(figure 2) for dry

vacuum-cleaning.

Insert the plug and turn on the switch, then appliance starts to work (Figure 5 &

6/7

6a or 6b)

When push the switch to the “I” position, the vacuum cleaner

will work; when push the switch to the “O” position, vacuum cleaner will not

work.while the tool which is connected with the socket working, the vacuum cleaner

also work 3-5 seconds later, while the tool stop working, the vacuum cleaner also stop

working.

The outer facility for the socket’s power is below 2000W.

The dust bag is suitable only for dry vacuum-cleaning!

 

 27.png

 

Maintenance – cleaning


 

Unplug before maintenance (Figure 1)

Take off the foamed plastic filter (Figure 3), and wash by water (Figure 5)

IMPORTANT:  Do not use detergents to clean the filter. The filter must be

thoroughly dry before the machine is used.

28.png

 


Related Products