Home > Knowledge > Content
How to deal with the influent of high-pressure washing machine high pressure washer?
- Sep 26, 2018 -

How to deal with the influent of high-pressure washing machine high pressure washer?


The inlet of the high-pressure cleaner needs to be filtered with a filter screen and then entered the machine. It is also possible to have a primary filter screen without a package. Clean the water with clean water.


The high-pressure washer can't pump water by itself. If the water is pumped manually, the water will come out very little without pressure. What's the reason?


1, high pressure washer is used for plunger pump, if not pumping water, then plunger or plunger sleeve has doubts.


2, the motor speed is not good or the inlet filter screen is too dirty with foreign matter blockage. There may be water leakage at the pressure gauge.


3, either breathe in dirty things or the water seal is broken.


Why is there no pressure on the high pressure washer?


Check whether the inlet pipe is leaking or do not connect the suction pipe to the tap water pipe. It is estimated that you have used all the inspection methods mentioned above. If there is no doubt, it is water seal. Perhaps the one-way valve is broken.


How often is the flow, pressure, speed, life and so on of a small high pressure cleaning machine?


Minicomputer pressure is usually at 50Bar, flow / speed varies according to the brand / model, minicomputer is mostly used in home / small and medium-sized industrial applications, service life in 5-8 years.


High-pressure cleaners may use treated soft water (urban tap water) when water is exhausted, and hard water not treated, such as groundwater, may shorten nozzle life.


Related Products